EmberlineMesh & Gutter · Sydney

Ember mesh atelier · Established 2007

When the wind turns,
your roof holds the line.

Eight out of ten homes lost in a bushfire are taken by embers, not flame. We hand-fit non-combustible aluminium ember mesh to the roofline, valleys and gutters of Sydney bushland homes — measured, crimped and finished on site, one house at a time.

Years on the roof
18
Homes meshed
2,430
Clients who refer us
98%
Aluminium 1.8 mm aperture Ember guard Valley & gutter mesh AS 3959 aligned Hand-crimped corners BAL 12.5 to BAL 40 Tile, colorbond, slate Non-combustible only Aluminium 1.8 mm aperture Ember guard Valley & gutter mesh AS 3959 aligned Hand-crimped corners BAL 12.5 to BAL 40 Tile, colorbond, slate Non-combustible only

Who we are

A small crew, a long ladder and a stubborn respect for detail.

Emberline was started in a Paddington garage by roof plumber Daniel Vasilek after the 2006 Blue Mountains season. Today we are a five-person crew working only in Sydney’s bushfire-prone suburbs — Hornsby to Sutherland, Wahroonga to Bundeena. We do one thing: we close every gap an ember could enter.

No sales agents, no subcontracted labour. The person who quotes your roof is the person who fits the mesh.

  • Corrosion-rated aluminium and stainless mesh — never plastic or fibreglass
  • 1.8 mm aperture as referenced in AS 3959 for ember protection
  • Ridge caps, barge boards, valleys, weepholes, gutters and downpipes
  • Ten-year workmanship warranty, written on the invoice
  • Fully insured, working-at-heights certified, licensed roof plumbing
Browse the full service list

The method

Four visits, no surprises.

  1. 01

    Roofline survey

    We walk the roof, photograph nothing and measure everything: ridge gaps, valley openings, gutter profile, tile type and your BAL rating. You receive a written gap register the same week.

  2. 02

    Fixed quote & mesh selection

    Aperture, alloy and finish are chosen for your exposure and roof material. Colour is matched to your gutter or roof sheet. The price is fixed per linear metre — no variations on the day.

  3. 03

    Fitting by hand

    Mesh is cut, folded and crimped on site so corners sit flat and water still runs. Saddles, clips and screws are all non-combustible. Most homes take one to two days.

  4. 04

    Hand-over & annual check

    We clear the gutters, walk the finished line with you and issue a compliance summary for your records. A reminder for the pre-summer inspection lands in your inbox each September.

Selected work

Three ways we close the gap.

i.

Gutter & valley mesh

Continuous aluminium ember mesh saddled over the gutter line and fixed under the first row of tiles or sheet. Keeps embers, leaf litter and bark out; keeps the flow of a storm in.

From $38 per linear metre, fitted

ii.

Roof cavity sealing

Ridge caps, barge boards, eave vents, whirlybirds and tile-end gaps screened individually. This is the slow, fiddly work that decides whether a roof cavity ignites.

Quoted per opening, from $24

iii.

Pre-season service

An annual clean and mesh inspection before the fire danger period: gutters cleared, clips re-tensioned, downpipe outlets flushed, written condition report.

From $290 per single-storey home

All services and inclusions

The difference, in words

One roofline, two summers.

Before — unmeshed roof

  • Open gutter collecting eucalypt leaf and bark all year
  • Ridge cap gaps of 12–20 mm straight into the roof cavity
  • Plastic leaf guard that softens and sags at 90 °C
  • Valley openings wide enough for burning bark
  • Manual clean-out three times a season, on a ladder

After — Emberline mesh

  • 1.8 mm aluminium mesh across gutter, valley and ridge
  • Every cavity opening screened and mechanically fixed
  • Non-combustible components throughout, no plastic clips
  • Leaf litter sheds off the roof instead of settling in it
  • One annual inspection — we bring the ladder

From the bushland fringe

“We back onto the Lane Cove valley and had lived with three evacuations. Daniel’s crew spent two days on our roof and showed me every single gap they closed. The following January we had ember fall across the street and our gutters stayed clean. That is worth every dollar.” Helen & Rob Marchetti — East Lindfield, BAL 29
“Quoted on Tuesday, meshed on Friday, and the colour match on the gutter line is invisible from the street.” Priya N. — Bundeena
“Our building certifier accepted the compliance summary without a single question. Tidy, quiet, no mess left behind.” Tom Braddock — Glenorie

Ask for a quote

Tell us about your roofline.

Send the form and we will call you within one business day to arrange a survey. Assessments across Greater Sydney’s bushfire-prone areas are free and take about forty minutes.